Plumbing services involve the installation, repair, maintenance, and troubleshooting of pipes that supply water and gas to homes and businesses. Plumbers also install, repair, and maintain waste drainage systems.
As a plumber, you will need to be flexible, physically strong, and have good motor skills. You may also be required to work in cramped spaces with a lot of tools, so coordination is essential.
A clogged drain is one of the most frustrating plumbing problems to deal with. Greasy water in the kitchen sink or dirty water in the bathtub are not only irritating, but they can also be very hazardous to your health and well-being.
Fortunately, there are ways to prevent clogged drains from occurring in the first place. However, if they do occur, you’ll need to deal with them as soon as possible.
The first thing you need to know is that a drain clog occurs when something gets stuck inside the pipes. This blockage can form anywhere in the system, from the main line to a subline or even in a small section of pipe within the wall.
In a typical house, there is a main sewer line and smaller sublines that run off it. This is a complex, highly interconnected system, which makes it difficult for you to pinpoint the exact location of the problem.
If the clog is in a small area, like a sink, it may be easier to find than if it is in a large part of your system. There are several tools that can be used to identify the exact source of a clog.
Another helpful tool is a specialized plumbing snake that can be hooked onto the clog and pushed down through your pipes to break it up or pull it out. These snakes are available at any hardware store and typically come in longer, stronger models that can reach up to 25 feet.
You can use these types of tools manually, but be aware that a clog that is too deep might require professional help. For a more extensive solution, you should consider hiring a plumber to inspect your system and recommend appropriate maintenance products.
Fat, oil, and grease that you or your family may pour down the drain may appear to be liquid, but they harden and stick to the walls of your pipes when they cool. This will cause a clog that’s difficult to remove.
Mineral buildup, especially if you live in a home with hard water, can also lead to clogged drains. The minerals that are present in hard water build up over time, causing limescale to form on the inside of your pipes.
A leaky pipe can be a very serious plumbing problem. Leaks can cause a lot of damage to your home and belongings if they are not fixed quickly. This is why it’s always best to get a professional plumber out to your home as soon as you notice any leaks in your pipes.
Luckily, there are a few ways to spot a water leak before calling a plumber for repairs. For instance, you can check your water meter to see if the numbers are changing even after you turn off all your faucets.
Another way to find a leak is to listen to your water lines. If you hear water running even when you’ve turned off all your faucets, this could be a sign that there is a leak in the main line that supplies water to your house.
If you are unsure where the leak is coming from, the first thing to do is to turn off the shut-off valve on your home’s main water supply. This is located either in a basement or utility room where the water pipe enters your home.
Then, you can take a look around the outside of your home for signs that water is coming through at ground level. This could be because of broken sprinkler pipes, a French drain, or grading that slopes toward your house.